Max OS 下用 pfctl 做 ip 转发不生效，有人知道为啥吗？

V2EX = way to explore

V2EX 是一个关于分享和探索的地方

现在注册

已注册用户请登录

这是一个创建于 1751 天前的主题，其中的信息可能已经有所发展或是发生改变。

想把发送到 192.168.1.8:80 的请求转发到 192.168.1.10:8000

在/etc/pf.conf中添加了如下规则：

scrub-anchor "com.apple/*"
nat-anchor "com.apple/*"
rdr-anchor "com.apple/*"
rdr pass on lo0 inet proto tcp from any to 192.168.1.8 port 80 -> 192.168.1.10 port 8000
rdr pass on en0 inet proto tcp from any to 192.168.1.8 port 80 -> 192.168.1.10 port 8000
rdr-anchor "debookee"
dummynet-anchor "com.apple/*"
anchor "com.apple/*"
anchor "debookee"
load anchor "com.apple" from "/etc/pf.anchors/com.apple"

然后启动

sudo sysctl -w net.inet.ip.forwarding=1
sudo pfctl -ef /etc/pf.conf

但并没有转发，是我用错了吗

Apple

192.168.1.10

port

5 条回复 • 2022-10-17 22:08:31 +08:00

henryshen233

2020-02-11 17:21:47 +08:00

网卡 en0 的地址是 192.168.1.8 吗。还有如果是的话，那个 lo0 怎么也会是 192.168.1.8 呢？

shadowsockss

2020-02-27 11:49:08 +08:00

rdr on lo0 inet proto tcp from any to 192.168.1.8 port 80 -> 192.168.1.10 port 8000
pass out on en0 route-to lo0 inet proto tcp from any to 192.168.1.8 port 80

shadowsockss

2020-02-27 12:01:05 +08:00

上面的规则不对...

shadowsockss

2020-02-27 12:06:29 +08:00

rdr on lo0 inet proto tcp from any to 172.217.3.110 port {80, 443} -> 127.0.0.1 port 7892
pass out on en0 route-to lo0 inet proto tcp from any to 172.217.3.110 port {80, 443}

这条规则可以实现
本机访问 172.217.3.110 端 80 443 时转到本机 7892 端口
自己思考一下怎么对应

yuange1975

2022-10-17 22:08:31 +08:00

# Work-around to redirect traffic originating from the machine itself

Follow steps 1, 2 as above, but in step 2 change the contents of the file pf.conf to

#The ports to redirect to proxy
redir_ports = "{http, https}"

#The address the transparent proxy is listening on
tproxy = "127.0.0.1 port 8080"

#The user the transparent proxy is running as
tproxy_user = "nobody"

#The users whose connection must be redirected.
#
#This cannot involve the user which runs the
#transparent proxy as that would cause an infinite loop.
#

rdr pass proto tcp from any to any port $redir_ports -> $tproxy
pass out route-to (lo0 127.0.0.1) proto tcp from any to any port $redir_ports user { != $tproxy_user }

Follow steps 3-5 above. This will redirect the packets from all users other than nobody on the machine to mitmproxy. To avoid circularity, run mitmproxy as the user nobody. Hence step 6 should look like:

sudo -u nobody mitmproxy --mode transparent --showhost